Air Classifier Mill – Validation Summary Report (VSR) Template

Validation Summary Report (VSR)

Equipment Information

Equipment: Air Classifier Mill

Subcategory: Solid Dosage Form (OSD)

Area: Production/Milling

DQ/IQ/OQ/PQ Flags: Yes/Yes/Yes/Yes

Acceptance Criteria Reference: URS

Key Critical Parameters: Classifier speed, airflow, PSD

Requalification Frequency: 24 Months

Summary

This Validation Summary Report outlines the validation activities conducted for the Air Classifier Mill used in the production of solid dosage forms. The report encompasses the Design Qualification (DQ), Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ) phases, ensuring compliance with regulatory standards and internal quality requirements.

Scope and Boundaries

The scope of this validation encompasses the Air Classifier Mill operations within the Production/Milling area, focusing on the critical parameters affecting product quality. The boundaries include equipment setup, operational procedures, and performance metrics as defined in the User Requirements Specification (URS).

Executed Protocol List

  • DQ Protocol: Air Classifier Mill DQ Report
  • IQ Protocol: Air Classifier Mill IQ Report
  • OQ Protocol: Air Classifier Mill OQ Report
  • PQ Protocol: Air Classifier Mill PQ Report

Deviations Summary

No deviations were recorded during the validation activities. All protocols were executed as per the approved plans and specifications.

CPP Verification Summary

Critical Process Parameters (CPPs) including classifier speed, airflow, and Particle Size Distribution (PSD) were verified and found to be within the established acceptance criteria as defined in the URS. All measurements were within the specified limits throughout the validation process.

Conclusion

The validation of the Air Classifier Mill has been successfully completed, confirming that the equipment operates consistently and within the required specifications. The results demonstrate compliance with the acceptance criteria outlined in the URS, and the equipment is deemed suitable for its intended use in the production of solid dosage forms.

See also  Fitz Mill / Comminuting Mill – Validation Summary Report (VSR) Template

Attachments Index

  • Attachment 1: Air Classifier Mill DQ Report
  • Attachment 2: Air Classifier Mill IQ Report
  • Attachment 3: Air Classifier Mill OQ Report
  • Attachment 4: Air Classifier Mill PQ Report
  • Attachment 5: Calibration Certificates

Approvals

Prepared by: [Name, Title]

Reviewed by: [Name, Title]

Approved by: [Name, Title]

Also Check:

Pneumatic Conveying (Dense Phase) – Qualification Execution Checklist

Qualification Execution Checklist Equipment: Pneumatic Conveying (Dense Phase) Subcategory: Solid Dosage Form (OSD) Area: Production/Material Transfer DQ/IQ/OQ/PQ Flags: Yes/Yes/Yes/Yes CSV Required: Yes Pre-start Training completed SOPs reviewed and approved User Requirements Specification (URS) approved Regulatory Affairs (RA) approved Calibration/PM Status…

Contained Transfer Port (RTP-like) – Deviation Impact Assessment

Deviation Impact Assessment Template Equipment Details Equipment: Contained Transfer Port (RTP-like) Area: Production/Containment Criticality: Critical Product Impact: Direct Deviation Details Deviation Description: [Insert detailed description of the deviation] Date of Deviation: [Insert date] Reported By: [Insert name] Classification Deviation Classification:…

Dust Extraction Unit (LEV for dispensing) – DQ Protocol

Document Control: Document ID: DQ-LEV-001 Version: 1.0 Effective Date: 2023-10-01 Review Date: 2024-10-01 Design Qualification Protocol for Dust Extraction Unit Meta Description: This Design Qualification Protocol outlines the validation process for the Dust Extraction Unit used in Solid Dosage Form…