Standard Operating Procedure for the Validation of Analytical Balances in the QC Laboratory
Purpose: This SOP defines the requirements and processes for the validation of Analytical Balances used in the QC Laboratory to ensure accurate weighing of samples and standards.
Scope: This SOP applies to all Analytical Balances (Micro/Semi/Analytical) utilized in the QC Lab for weighing purposes.
Definitions:
- Analytical Balance: A highly sensitive laboratory instrument used to measure mass with high precision.
- Validation: The process of ensuring that equipment meets its intended use and performs consistently.
- DQ: Design Qualification
- IQ: Installation Qualification
- OQ: Operational Qualification
- PQ: Performance Qualification
Roles:
- Quality Assurance (QA): Responsible for overseeing the validation process and maintaining compliance.
- Laboratory Personnel: Responsible for performing validation activities and ensuring proper use of Analytical Balances.
- Maintenance Personnel: Responsible for calibration and preventive maintenance of the equipment.
Lifecycle Procedure:
- Design Qualification (DQ): Review and document the design specifications of the Analytical Balance.
- Installation Qualification (IQ): Verify installation according to manufacturer specifications and document.
- Operational Qualification (OQ): Test and document the operational performance of the Analytical Balance under normal operating conditions.
- Performance Qualification (PQ): Validate the performance of the balance using actual samples and standards.
GDP Controls: Good Documentation Practices (GDP) must be followed during all validation activities to ensure traceability and accountability.
Acceptance Criteria Governance: Acceptance criteria shall be established based on the User Requirement Specification (URS) and Annex 11 guidelines to ensure compliance with regulatory standards.
Calibration/PM Governance: Analytical Balances must be calibrated according to the manufacturer’s recommendations and undergo preventive maintenance at specified intervals to ensure continued accuracy.
Change Control Triggers: Any changes to the Analytical Balance, including software updates, relocation, or modification, must initiate a change control process.
Revalidation Triggers and Periodic Review: Revalidation is required every 12 months or whenever significant changes occur that may affect the balance’s performance.
Records/Attachments List:
- Validation Protocols
- Calibration Certificates
- Change Control Records
- Revalidation Reports
- Training Records