De-lumper / Lump Breaker – Validation Summary Report (VSR) Template

Validation Summary Report

Equipment: De-lumper / Lump Breaker

Subcategory: Solid Dosage Form (OSD)

Area: Production/Sieving

Summary

This Validation Summary Report (VSR) outlines the validation activities performed for the De-lumper / Lump Breaker utilized in the Production/Sieving area for Solid Dosage Forms. The validation process follows the guidelines set forth in the User Requirement Specification (URS).

Scope/Boundaries

The scope of this validation includes the Design Qualification (DQ), Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ) of the De-lumper / Lump Breaker. The boundaries of this validation encompass all aspects of the equipment’s operation within the specified area.

Executed Protocol List

  • Design Qualification (DQ) Protocol
  • Installation Qualification (IQ) Protocol
  • Operational Qualification (OQ) Protocol
  • Performance Qualification (PQ) Protocol

Deviations Summary

No deviations were noted during the execution of the validation protocols. All activities were completed in accordance with the established procedures and acceptance criteria.

CPP Verification Summary

The key critical parameter, blade speed torque, was verified during the OQ phase of validation. All readings were within the acceptable limits as defined in the URS, confirming the equipment’s capability to perform as intended.

Conclusion

The De-lumper / Lump Breaker has successfully passed all validation phases (DQ, IQ, OQ, PQ) and is deemed suitable for use in the Production/Sieving area for Solid Dosage Forms. The equipment will be requalified every 24 months to ensure continued compliance and performance.

Attachments Index

  • Design Qualification (DQ) Protocol Document
  • Installation Qualification (IQ) Protocol Document
  • Operational Qualification (OQ) Protocol Document
  • Performance Qualification (PQ) Protocol Document
  • URS Document
See also  Pneumatic Conveying (Dilute Phase) – DQ Protocol

Approvals

This report has been reviewed and approved by the following personnel:

  • Validation Manager: ______________________
  • Quality Assurance: ______________________
  • Production Supervisor: ______________________

Also Check:

De-lumper / Lump Breaker – PQ Protocol

Document Control Document Number: PQ-OSD-001 Version: 1.0 Effective Date: [Insert Date] Review Date: [Insert Date] Prepared By: [Insert Name] Approved By: [Insert Name] Performance Qualification Protocol for De-lumper / Lump Breaker Objective: To validate the performance of the De-lumper /…

Weighing Balance (Platform/Floor) – DQ Protocol

Document Number: DQ-OSD-WB-001 Version: 1.0 Effective Date: 2023-10-01 Review Date: 2024-10-01 Prepared By: [Your Name] Approved By: [Approver’s Name] Design Qualification Protocol for Weighing Balance in Solid Dosage Form Objective: To establish a Design Qualification (DQ) protocol for the Weighing…

Pneumatic Conveying (Dilute Phase) – DQ Protocol

Design Qualification Protocol for Pneumatic Conveying System in Solid Dosage Form Document Number: DQ-OSD-PC-001 Version: 1.0 Effective Date: [Insert Date] Review Date: [Insert Date] Prepared By: [Insert Name] Approved By: [Insert Name] Objective The objective of this Design Qualification (DQ)…