Document Number: PQ-DEP-001
Version: 1.0
Effective Date: YYYY-MM-DD
Prepared By: [Name]
Approved By: [Name]
Performance Qualification Protocol for Depot Suspension Preparation Vessel
Meta Description: This document outlines the Performance Qualification protocol for the Depot Suspension Preparation Vessel used in the production of long-acting injectables, ensuring compliance with regulatory standards.
Tags: Equipment Validation, NDDS, Long-Acting Injectables, Performance Qualification, Depot Suspensions
Objective
The objective of this Performance Qualification (PQ) protocol is to verify that the Depot Suspension Preparation Vessel operates within specified limits and meets the defined critical parameters for the production of depot suspensions.
Scope
This protocol applies to the PQ of the Depot Suspension Preparation Vessel utilized in the production area for the preparation of long-acting injectable depot suspensions. The scope includes the evaluation of critical process parameters and compliance with regulatory requirements.
Responsibilities
- Validation Team: Responsible for executing the PQ protocol and documenting results.
- Quality Assurance: Responsible for reviewing and approving the PQ documentation.
- Production Personnel: Responsible for operating the equipment during the PQ process.
Prerequisites
- Completion of Installation Qualification (IQ) and Operational Qualification (OQ).
- Availability of necessary materials and equipment.
- Training of personnel on the operation of the Depot Suspension Preparation Vessel.
Equipment Description
The Depot Suspension Preparation Vessel is designed for the mixing and preparation of depot suspension formulations. It features adjustable agitation speed, temperature control, and viscosity measurement capabilities, essential for ensuring product quality.
Test Plan
| Test ID | Procedure | Acceptance Criteria | Evidence |
|---|---|---|---|
| PQ-001 | Verify agitation speed | Agitation speed within specified range | Calibration records |
| PQ-002 | Measure temperature | Temperature maintained within specified limits | Temperature log |
| PQ-003 | Assess viscosity | Viscosity within acceptable range | Viscosity measurement records |
| PQ-004 | Document mixing time | Mixing time meets specified duration | Process log |
Detailed Test Cases
Test Case 1: Verify Agitation Speed
- Procedure: Set the vessel to the specified agitation speed and confirm via calibrated tachometer.
- Acceptance Criteria: Agitation speed must be within ±10% of the target speed.
- Evidence: Record tachometer readings and calibration certificate.
Test Case 2: Measure Temperature
- Procedure: Monitor the temperature using calibrated thermocouples.
- Acceptance Criteria: Temperature must remain within ±2°C of the target temperature.
- Evidence: Temperature logs from the monitoring system.
Test Case 3: Assess Viscosity
- Procedure: Use a viscometer to measure the viscosity of the prepared suspension.
- Acceptance Criteria: Viscosity must fall within specified limits as per URS.
- Evidence: Viscosity measurement records.
Test Case 4: Document Mixing Time
- Procedure: Start timing when mixing begins and stop when the specified mixing duration is reached.
- Acceptance Criteria: Mixing time must not exceed the defined duration.
- Evidence: Process log documenting start and end times.
Deviations
Any deviations from the protocol must be documented and assessed for impact on the validation results. A deviation report should be submitted for review and approval by Quality Assurance.
Approvals
Prepared By: ______________________
Approved By: ______________________
Date: ______________________