Document ID: IQ-001
Version: 1.0
Effective Date: YYYY-MM-DD
Reviewed By: [Reviewer Name]
Approval Date: YYYY-MM-DD
Installation Qualification Protocol for Static Incubator in Biologics Upstream Processing
Objective: To ensure that the Static Incubator is installed correctly and operates according to specified requirements for cell incubation in the production area.
Scope: This protocol applies to the Static Incubator used in the Production/Cell Culture area for biologics upstream processing.
Responsibilities:
- Validation Team: Execute the protocol and document results.
- Quality Assurance: Review and approve the protocol and results.
- Operations: Ensure equipment is available and operational for testing.
Prerequisites:
- Equipment is installed and powered on.
- All necessary utilities (electricity, water, etc.) are connected.
- Staff training on equipment operation is completed.
Equipment Description: The Static Incubator is designed for cell incubation, featuring precise temperature control and uniformity, critical for maintaining cell culture viability.
| Test ID | Procedure | Acceptance | Evidence |
|---|---|---|---|
| IQ-01 | Verify installation according to manufacturer specifications. | All components installed as per guidelines. | Installation checklist and photographs. |
| IQ-02 | Check temperature uniformity using PLC logs. | Temperature variation within acceptable limits. | PLC log data and analysis report. |
| IQ-03 | Conduct data integrity checks on CSV files. | No discrepancies found in data logs. | Data integrity audit report. |
Detailed Test Cases:
- Test ID: IQ-01 – Confirm all physical components are installed, including shelves and temperature sensors, following the manufacturer’s installation manual.
- Test ID: IQ-02 – Monitor and log temperature readings from the PLC over a defined period; ensure readings remain within specified limits for uniformity.
- Test ID: IQ-03 – Perform a review of the CSV files generated by the PLC to confirm that data is complete and accurate, with no missing entries.
Deviations: Any deviations from the acceptance criteria must be documented and investigated. A corrective action plan must be established for any critical failures.
Approvals:
- Prepared By: [Preparer Name] – Date: YYYY-MM-DD
- Reviewed By: [Reviewer Name] – Date: YYYY-MM-DD
- Approved By: [Approver Name] – Date: YYYY-MM-DD