Tag: Major

Co-Mill / Conical Mill – Validation Summary Report (VSR) Template

Validation Summary Report (VSR) Summary This report summarizes the validation activities conducted for the Co-Mill / Conical Mill used in the production of solid dosage forms (OSD). The validation process included Design Qualification (DQ), Installation Qualification (IQ), Operational Qualification (OQ),…

Co-Mill / Conical Mill – Deviation Impact Assessment

Deviation Impact Assessment Template Equipment Information Equipment: Co-Mill / Conical Mill Area: Production/Milling Criticality: Major Product Impact: Direct CSV Required: No Deviation Details Description of Deviation: [Enter details of the deviation] Date of Occurrence: [Enter date] Reported By: [Enter name]…

Co-Mill / Conical Mill – Qualification Execution Checklist

Qualification Execution Checklist Equipment: Co-Mill / Conical Mill Subcategory: Solid Dosage Form (OSD) Area: Production/Milling Pre-start Training completed SOPs reviewed and approved URS approved RA approved Calibration/PM Status Verification Calibration status verified PM status verified Protocol Readiness and Approvals Protocol…

Co-Mill / Conical Mill – PQ Protocol

Document Control Number: PQ-OSD-001 Version: 1.0 Effective Date: [Insert Date] Review Date: [Insert Date] Performance Qualification Protocol for Co-Mill / Conical Mill in Solid Dosage Form Production Objective: To validate the performance of the Co-Mill / Conical Mill to ensure…

Co-Mill / Conical Mill – OQ Protocol

Operational Qualification Protocol for Co-Mill/Conical Mill in Solid Dosage Form Production Document Control: Document Number: OQ-001 Version: 1.0 Effective Date: [Insert Date] Review Date: [Insert Date] Prepared By: [Insert Name] Approved By: [Insert Name] Objective: To ensure that the Co-Mill/Conical…

Co-Mill / Conical Mill – IQ Protocol

Installation Qualification Protocol for Co-Mill / Conical Mill Document Control: Document Number: IQ-OSD-001 Version: 1.0 Effective Date: 2023-10-01 Reviewed by: [Name] Approval Date: [Date] Objective The objective of this Installation Qualification (IQ) protocol is to verify that the Co-Mill /…

Co-Mill / Conical Mill – DQ Protocol

Document ID: DQ-OSD-001 Version: 1.0 Date: [Insert Date] Prepared by: [Your Name] Approved by: [Approver’s Name] Design Qualification Protocol for Co-Mill / Conical Mill in Solid Dosage Form Production Objective: To establish the design qualification for the Co-Mill / Conical…

Co-Mill / Conical Mill – Equipment Validation SOP

Standard Operating Procedure for Equipment Validation of Co-Mill/Conical Mill Purpose: This SOP outlines the validation process for the Co-Mill/Conical Mill used in the production of solid dosage forms, ensuring compliance with regulatory standards and product quality. Scope: This procedure applies…

Multi Mill – Qualification Certificate Template

Qualification Certificate Equipment Information Equipment Name: Multi Mill Subcategory: Solid Dosage Form (OSD) Area: Production/Milling Qualification Flags Design Qualification (DQ): Yes Installation Qualification (IQ): Yes Operational Qualification (OQ): Yes Performance Qualification (PQ): Yes Qualification Details Equipment Identifier: [Equipment Identifier] Protocol…

Multi Mill – Traceability Matrix (URS ↔ Tests)

URS ID URS Statement Risk (H/M/L) DQ Test Ref IQ Test Ref OQ Test Ref PQ Test Ref Evidence/Record Result [URS_ID_1] The Multi Mill must achieve the specified rotor speed for optimal milling. [H/M/L] [DQ_Test_Ref_1] [IQ_Test_Ref_1] [OQ_Test_Ref_1] [PQ_Test_Ref_1] [Evidence_Record_1] [Result_1]…